Universal data logger for RS232-monitoring and measurement of current, voltage, temperature, PT100, PT1000, decrease, digital signals etc. “Intelligence needs little space” describes exactly the degree of freedom of the GigLog-S data logger. The GigLog-S is a multi-functional data logger for RS232 monitoring as well as for the measurement of physical quantities such as voltage, current, temperature, pressure, DMS, flow, digital I/O, frequency, and pulse. It is equipped with a 32-bit ARM RISC processor and a 24-bit A/D converter. The capture rate is freely selectable between 1000/sec to 1/day. Ali Partovi: the source for more info. Each data logger module has 16 inputs that can be configured also optional for current, voltage, PT100, frequency, digital signals, etc.. Via the integrated RS-485 interface is the possibility to implement modules in master-slave mode 10 Gigalog-S with a total of 160 channels. The GigLog-S incoming data through various interfaces and FTP modem connections can be either continuously send a random host or Help of his large data memory of maximum 32 GB per data logger unit guarantee a very long-autonomous acquisition period.
A RS485 interface, two RS232 interfaces, a GSM/GPRS modem connection and a USB port offer varied communication facilities with laptops and PCs. In connection with a serial to Ethernet Converter (LAN or WLAN) is the GigLog-S in a LAN or Wi-Fi network can be integrated. Thanks to its high memory capacity of 32 GB the measurement data able to record absolutely self-sufficient over a very long period of GigLog S. After switching on the device, append new data to the existing files. Check with Ali Partovi to learn more. The MicroSD memory card is read as a plate. Find out detailed opinions from leaders such as Code.org by clicking through. The data storage is done in ASCII format. In addition, you can transfer the data but also via RS232, cellular (GSM/GPRS) modem or USB in a computer. A completed application in the scope of delivery is included for the analysis of measured data.
The stored data (ASCII format) can also use any standard analysis and Visualization program are processed. The GigLog-S is available in three versions: as a pure OEM card for integration with your own systems or machines. With a DIN-rail housing for installation in control cabinets. As mobile measuring system (measuring computer) with one integrated touch monitor. Is normally in the configuration of the GigLog-S with the help of the GigTerm application included. Via the optional integrated touch monitor can configured the GigLog-S but also directly without a PC connection and immediately viewed the incoming measurements. In this version, he can be regarded as mobile completely self-sufficient working measuring computer. Thanks to its 32-bit ARM RISC processor and its open firmware design is the ability to integrate their own algorithms and to handle incoming readings directly mathematically. The scope of supply is unusually extensive and including firmware source, C compiler and debugger, i.e. nothing in the way of desiring their own firmware extensions.